Skip to main content

Blaser Saddle Mount for Aimpoint Micro

Product information "Blaser Saddle Mount for Aimpoint Micro"

The Original Blaser Saddle Mount for Aimpoint Micro

The Blaser saddle mount is the standard for all Blaser rifles: The bolt action rifles R8 and R93, combinated rifles B95 & B97, the double rifle S2, the Drilling D99 or BD14 or the Break-Open-Gun K95 - for them all this original Blaser saddle mount is the right accessory to put an Aimpoint Micro H1 or H2 on your rifle as a driven hunt red dot sight.

 

Details:

  • Original Blaser Saddle Mount for Aimpoint Micro H1 & H2
  • quick-release fasteners
  • incl. screws for mounting the Aimpoint Micro

 

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Ähnliche Artikel

Fibre Insert for Blaser R93 Rifles (yellow-green)
Fibre Insert for Blaser R93 Rifles (yellow-green) The bead shines bright yellow/green in daylight. This fibre insert is to replace the "normal" black bead of the Blaser R93 rifle for a better aiming performance. The dimensions are about: 2,75mm x 11,0 mm x 14,1 mm   Hint: Does not fit the Blaser R8 rifles! Therefor please check the LED-Sight, which fits both: Blaser R8 and R93 and many other type of rifles Only the bead insert is beeing delivered, the pictures shows it´s use on the base.

€12.99*
Aimpoint Micro H2 - with original Blaser saddle mount
Aimpoint Micro H2 with original Blaser saddle mount as a package The Micro H2 is the result of feedback from long-time customers who want an even more powerful driven hunt red-dot-sight. Reliability, fast target acquisition and ruggedness are the main features. The red dot can be grasped intuitively and is parallax-free. 12 light levels are available - suitable for daylight. The housing is waterproof, the battery (1x CR2032) can continuously illuminate the red dot sight for up to 50,000 hours (more than 5 years).   Details: Size of the light spot: 2 MOA Parallax-free Battery supply: CR 2032 12 daylight-compatible dimming levels Waterproof length: 68 mm width/height: 41 x 36 mm Weight: 243 g Can be used from -30° to +60°. Package: includes a original Blaser saddle mount   Hint: The front lens of the Aimpoint is intentionally mounted at an angle! This is not a mistake, but serves to deflect light reflexes (so that the target does not become aware of the shooter).

€899.10*
Innomount Quick Release Mount for Blaser (slight long) - Aimpoint Micro
Innomount quick detachable scope mount for Blaser rifles (slight long) - Aimpoint Micro The Innomount Slight Long is a minimalist and reliable rifle scope mount for the Aimpoint Micro. Due to the low overall height of only 6 mm and the Innogun-typical quick-release fasteners, the assembly is virtually predestined for use in the next driven hunt. The mounting on the upper side is suitable for the Aimpoint Micro H1 / H2 / T2 red point target optics as well as for the identical Holosun device.   Details: Clamping lever with protection against unintentional opening repeatable accuracy made of steel suitable for Blaser suitable or Aimpoint Micro / Holosun Overall height: 6 mm Type number: 52-AM-06-00-800    

€249.00*
Tip
Titanium Gunworks LED-Sight Firefly
With the LED illuminated front sight for Your hunting rifle, we have pushed the performance of using open sights untill night! - so it is a perfect tool for hunting on driven hunts, follow ups and anything, but the worst light and weather conditions With our latest LED-Sight "Firefly" we have illuminated the whole bead of the front sight - this results in an easier-to-use then our first editions of the LED-Sights "Classic" or "Day&Nightfire" (with those there is just a small dot of the bead illuminated!) and a much higher light output - so day light visibility has increased very much! It interacts also with a broader range of rear sights then the old editions. In daylight, the LED-Sight "Firefly" could be used like a normal fibre sight as it´s plastic material is light gathering and self-illumnating under the sun. But as soon as You switch the LED on, You have an active illuminated front sight, allowing You to aim & shoot under the worst light conditions easily (untill darkness!) - which You can´t perform with any other open sights! The battery (Battery BR 435) runs up to 15 hours. The housing is waterproof sealed. The sight is height adjustable. 1:1 exchange with most rifles - and in worst case just a potrusion bolt is required - which is not a big task for any serious gunsmith!   1:1 exchange is possible with this type of guns (if not a special edition): Blaser R93 Blaser R8 Blaser K95 Heym SR 30 Heym SR 21 Mauser M03 Mauser M12 Sauer 202 Sauer 303 Sauer 404 u.v.m. and with an adaptor also with this type of guns Benelli Browning Rößler Remington Sako Tikka   Technical Details: Length: 78 mm Height of Base: 14 mm max. height of the bead over the base: 6 mm Weight with battery: ca. 12 g   Hint: With the editions "Firefly" and "Chamäleon" You don´t need to place the bolt ( #10 in the manual) between the spring while assembling the LED-Sight on your rifle.   Gebrauchsanleitung-deutsch-1-0 (please download here) Manual-for-LED-Sight (English) Mode-d-Employ (French)   Comparing the different modells (left to right: Day&Nightfire, Chamäleaon, Firefly)       Comparing Chamäleon (left) and Firefly (right) in daylight and at night conditions    

€99.00*

Zubehör Produkte

HMS Samo
HMS SAMO - An alternative scope mount for all weapons with Blaser saddle mounts The Henneberger montages are the inexpensive but high quality connection between rifle scopes and weapon. The SAMO system, milled from solid steel, is absolutely recoilproof and without any change of the POI while mounting and dismounting it.This new model is slimmer and lighter than comparable models. The SAMO is available with rings (25.4/26 mm, 30 mm, 34 mm, 36 mm and 40 mm), for Zeiss rail, Swarovski SR rail, Doctersight (also identical models), Aimpoint Micro H1/H2, Trijicon MRO and with Picatinny/Weaver rail. Details: High accuracy recoilproof Made of steel Flat mounting Slim and lightweight Special feature of the version for the Doctersight: With a height of just 3.5 mm, it is probably the flattest scope mount in its segment in the world.   Special feature of the version for Swarovski SR rail: Here the teeth are milled from solid steel - and not from a plastic inlay as in the original Blaser scope mount. This is a significant improvement over the original!   Hint: Please note that the pictures are only exemplary and the accessories, in this case the rifle as well as the target optics, are not sold.

From €325.00*
Aimpoint Micro H2 - with original Blaser saddle mount
Aimpoint Micro H2 with original Blaser saddle mount as a package The Micro H2 is the result of feedback from long-time customers who want an even more powerful driven hunt red-dot-sight. Reliability, fast target acquisition and ruggedness are the main features. The red dot can be grasped intuitively and is parallax-free. 12 light levels are available - suitable for daylight. The housing is waterproof, the battery (1x CR2032) can continuously illuminate the red dot sight for up to 50,000 hours (more than 5 years).   Details: Size of the light spot: 2 MOA Parallax-free Battery supply: CR 2032 12 daylight-compatible dimming levels Waterproof length: 68 mm width/height: 41 x 36 mm Weight: 243 g Can be used from -30° to +60°. Package: includes a original Blaser saddle mount   Hint: The front lens of the Aimpoint is intentionally mounted at an angle! This is not a mistake, but serves to deflect light reflexes (so that the target does not become aware of the shooter).

€899.10*
Innomount Quick Release Mount for Blaser (slight long) - Aimpoint Micro
Innomount quick detachable scope mount for Blaser rifles (slight long) - Aimpoint Micro The Innomount Slight Long is a minimalist and reliable rifle scope mount for the Aimpoint Micro. Due to the low overall height of only 6 mm and the Innogun-typical quick-release fasteners, the assembly is virtually predestined for use in the next driven hunt. The mounting on the upper side is suitable for the Aimpoint Micro H1 / H2 / T2 red point target optics as well as for the identical Holosun device.   Details: Clamping lever with protection against unintentional opening repeatable accuracy made of steel suitable for Blaser suitable or Aimpoint Micro / Holosun Overall height: 6 mm Type number: 52-AM-06-00-800    

€249.00*