Innomount Zero for Blaser - Zeiss The Innomount Zero quick release mount for Blaser hunting rifles is a solid connection between rifle and optics. With the new Zero locking mechanism, you screw the mount onto the rifle and then press the lever to mount - this decouples it and prevents it from operating the bolt mechanism. To release the mount again, pull the lever towards you, this couples it in the breech mechanism and now the breech can be released again. A very reliable and safe method. Innomount attaches great importance to the highest manufacturing quality. The mount is not only an inexpensive alternative to the original Blaser saddle mount, but it also features innovative detail solutions. By the uniform admission of all newer Blaser hunting rifles fits this mounting of course on all Blaser weapons such as the R8, R93, K95, D99, BF97 or the triplet BD14. Details: "Zero" locking mechanism highly accurate suitable for Blaser suitable for Zeiss rail height: 9 mm type number: 40-VM-09-00-800

Innomount Zero - Blaser - Zeiss with 14 mm height The Innomount Zero mount for Blaser hunting rifles is a solid connection between rifle and optics. Innomount attaches great importance to the highest manufacturing quality.  The quick-release assembly is repeatable and features innovative quick-release fasteners. This special version with an overall height of 14 mm is ideal for the use of special optics. The mounting is suitable for Zeiss rifle scopes with inner rail as well as for many other renowned manufacturers who also use the Zeiss inner rail: Leica, Meopta, etc.   Details: ZERO-locking mechanism repeatable suitable for Blaser suitable for Zeiss VM/ZM inner rail Overall height: 14 mm Type Number: 40-VM-14-00-800

Innomount quick detachable scope mount for Blaser - Zeiss VM/ZM inner rail The Innomount quick release mount for Blaser hunting rifles is a solid connection between rifle and optics. Innomount attaches great importance to the highest manufacturing quality. The assembly is not only an inexpensive alternative to the original Blaser saddle mount, but it also has innovative detail solutions. Due to the uniform mounting of all newer Blaser hunting rifles, this mounting naturally fits all Blaser rifles such as the R8, R93, K95, D99, BF97 or the Drilling BD14. The quick-release mount is repeatable and has innovative quick-release fasteners. These work reliably and are easy to operate. When closed, they also lie in the housing - so they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. By using 3 sliding blocks to fix the rifle scope with Zeiss inner rail, a reliable hold of the optics on the rifle scope mounting is guaranteed. Even when using recoil-strong hunting rifles. The mounting is suitable for Zeiss rifle scopes with inner rail as well as for many other renowned manufacturers who also use the Zeiss inner rail: Leica, Meopta, etc.   Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser suitable for Zeiss VM/ZM inner rail Overall height: 9 mm Type Number: 50-VM-09-00-800

Innomount quick detachable scope mount for Blaser - Zeiss VM/ZM inner rail - Height 20mm The Innomount quick release mount for Blaser hunting rifles is a solid connection between rifle and optics. Innomount attaches great importance to the highest manufacturing quality. The assembly is not only an inexpensive alternative to the original Blaser saddle mount, but it also has innovative detail solutions. Due to the uniform mounting of all newer Blaser hunting rifles, this mounting naturally fits all Blaser rifles such as the R8, R93, K95, D99, BF97 or the Drilling BD14. The quick-release assembly is repeatable and features innovative quick-release fasteners. This special version with an overall height of 20mm is ideal for the use of special optics. The mounting is suitable for Zeiss rifle scopes with inner rail as well as for many other renowned manufacturers who also use the Zeiss inner rail: Leica, Meopta, etc.   Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser suitable for Zeiss VM/ZM inner rail Overall height: 20 mm Type Number: 50-VM-20-00-800

HMS SAMO - An alternative scope mount for all weapons with Blaser saddle mounts The Henneberger montages are the inexpensive but high quality connection between rifle scopes and weapon. The SAMO system, milled from solid steel, is absolutely recoilproof and without any change of the POI while mounting and dismounting it.This new model is slimmer and lighter than comparable models. The SAMO is available with rings (25.4/26 mm, 30 mm, 34 mm, 36 mm and 40 mm), for Zeiss rail, Swarovski SR rail, Doctersight (also identical models), Aimpoint Micro H1/H2, Trijicon MRO and with Picatinny/Weaver rail. Details: High accuracy recoilproof Made of steel Flat mounting Slim and lightweight Special feature of the version for the Doctersight: With a height of just 3.5 mm, it is probably the flattest scope mount in its segment in the world.   Special feature of the version for Swarovski SR rail: Here the teeth are milled from solid steel - and not from a plastic inlay as in the original Blaser scope mount. This is a significant improvement over the original!   Hint: Please note that the pictures are only exemplary and the accessories, in this case the rifle as well as the target optics, are not sold.

HMS SAMO Mount for Blaser - Zeiss The Henneberger SAMO mount suitable for Blaser rifles and target optics with Zeiss rail. The HMS SAMO has detail solutions which are better than the original. For example, the adjustment screw for the adjustment of the holding force is provided with a TORX nut instead of the multiple slotted nut. This allows a much easier adjustment with standard tools (Torx wrench). Details: high quality assembly MADE IN GERMANY accurately manufactured on CNC machines clamping nut with TORX drive suitable for Blaser rifles suitable for Zeiss rail  

The LED-Sight Day&Nightfire is the perfect LED illuminated front-sightåÊfor Your hunting rifle The LED-Sight Day&Nightfire is an active LED illuminated front sight. By switching the LED on, You have perfect conditions to aim even under the worst light conditions. You will be surprised, how easy this will work - perfect for driven hunts or follow ups- The LED-Sights compared: left "Classic", right "Day&Nightfire"   advantages of the LED-Sight compared against other options: While using a rifle scope, You carry the LED-Sight always on your rifleå«s barrel, while red dots wonå«t be on place when You suddenly need them. Completly waterproof and no optical side effects by glaring through the water like you have by some red dots The Day&Nightfire edition works in daylight like a fibre sight by collecting the daylight, so it works even passive without any battery. When You turn the LED on, it plays out itå«s advantages: perfect aiming conditions, even under worst light conditions! Very cheap compared to other options like red-dots or scopes Perceft for driven hunts and follow-ups of wounded game...   details: easy 1:1 exchange with most rifles: Blaser R93 / Blaser R8 / Blaser K95 / Sauer 202 & 303 & 404 / Heym SR 21 & 30 / Mauser M03, Mauser M12, and many more With all other rifles: all needed is a potrusion bolt on the barrel battery works about 10-12 hours Sight is hight adjustable reduncy: without battery, it works like a classic fibre sight   manuals for download: Gebrauchsanleitung-deutsch-1-0 (German) Manual-for-LED-Sight (English) Mode-d-Employ (French)  

Innomount BG-1/4 inch torque - screwdriver for mounting riflescopes "Hand-tight" is not enough for us. If you want to mount a riflescope properly and reliably, you should do so with the right torque. With its adjustable torque of 0.8 to 6 Nm, this torque screwdriver covers almost all mounting work on riflescope mounts. The scope of delivery includes 5 bits (Torx & hexagon socket) for the most common Innomount screws. However, any 1/4 inch bit will fit into the holder.   Note: For permanent fastening of screws on ZFR mounts, we recommend the additional use of screw locking varnish to prevent screws from loosening unintentionally. We have had good experiences with "Loctite 243" (no guarantee).

Assembling Screw for Blaser saddle scope mount (Swarovski SR -Rail / Zeiss VM-Rail) The replacement screws for Blaser saddle mount with Swarovski SR-rail or Zeiss VM-Rail. As a replacement or spare part for lost or damaged screws. Since there are several versions, please make sure you check the compatibility! For assembly, we recommend using Loctite 243 and a torque wrench.   Details: screw DIN 7984 M4x8 Steel 8.8, black Hexagon socket Recommended max. torque: 3.0 Nm