Innomount quick detachable scope mount for Tikka T3 - Guide TS450
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mounting is suitable for the Guide TS450 thermal imgae scope.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for ATN and X-Sight I+II / Thor / Mars
height: 17 mm
Type number: 50-GT-17-00-400
Innomount quick detachable scope mount for Tikka T3 - I Ray Mini
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mounting is suitable for the I Ray Mini, or Liemke Merlin 19E/25E scope.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for I Ray Mini, or Liemke Merlin 19E/25E
height: 16 mm
Type number: 50-IRM-16-00-400
Innomount quick detachable scope mount for Tikka T3 - I Ray Saim
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mounting is suitable for the I Ray Saim, or Liemke Sperber 25/35 scope.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for I Ray Saim, or Liemke Sperber 25/35
height: 16 mm
Type number: 50-IRS-16-00-400
Innomount quick detachable scope mount for Tikka T3 - Swarovski SR rail
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The serration on the upper side of the scope mount is milled from the solid, which guarantees a reliable transmission of the recoil forces of your weapon to the Swarovski scope by means of the SR rail. Thus nothing can slip.
The Innomount mount is a first-class scope mounts for your Tikka T3 rifle. Due to a variety of different designs, you have almost every possible combination of your rifle and the desired target optics at your disposal.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for Swarovski riflescope with SR rail
height: 10 mm
Type number: 50-SR-10-00-400
Innomount quick detachable scope mount for Tikka T3 - Zeiss rail
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The Zeiss inner rail is currently used by several manufacturers, as their patent has expired. Therefore you can mount riflescopes of the brands Zeiss, Leica, Meopta, etc. easily and reliably on this mount.
The Innomount mount is a first-class scope mounts for your Tikka T3 rifle. Due to a variety of different designs, you have almost every possible combination of your rifle and the desired target optics at your disposal.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for riflescopes with Zeiss rail
height: 9 mm
Type number: 50-VM-09-00-400
Innomount quick detachable scope mount for Tikka T3 - Schmidt & Bender Convex-Rail
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mounting is suitable for the Schmidt & Bender Convex rail.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for Schmidt & Bender Convex Rail
height: 10 mm
Type number: 50-SB-10-00-400
Innomount quick detachable scope mount for Tikka T3 - Ring Mount
The Innomount quick detachable scope mount offers a classic rifle scope assembly for Your Tikka T3 rifle using rings. Rings of 26, 30, 34, 35, 36 or 40mm diameter are available. In addition, there are 3 different heights for each diameter. The "base" remains the same, the rings are offered in different heights and are securely bolted to the base using a pivot pin.
The scope mount has quick-release fasteners which are secured against unintentional opening.
Fits on a Tikka T3 rifle.
Height:
Rings (standard) in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 16 mm
Rings BH+3 in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 19 mm
Rings BH+6 in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 22 mm
Details:
Clamping lever with protection against unintentional opening
repeatable
made of steel
suitable for Tikka T3
suitable for mounting with rings of different diameters
Overall height: 16 / 19 or 22 mm
Innomount quick detachable scope mount for Tikka T3 - Pard NV 008
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mounting is suitable for the Pard NV008 Night Vision scope and the SA-Series.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for Pard NV 008
height: 13 mm
Type number: 50-PD-13-00-400
Innomount quick detachable scope mount for Tikka T3 - Pulsar APEX bzw. Digisight / Trail Thermal sight
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mounting is suitable for the Pulsar APEX bzw. Digisight / Trail Thermal sight.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for Pulsar APEX bzw. Digisight / Trail Thermal sight
height: 10 mm
Type number: 50-PA-10-00-400
Innomount quick detachable scope mount for Tikka T3 - Yukon Photon
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mounting is suitable for the Yukon Photon night vision.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for Yukon Photon
height: 27 mm
Type number: 50-YP-27-00-400
Innomount quick detachable scope mount for Tikka T3 - Dedal Hunter
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mounting is suitable for the Dedal Hunter night vision.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for Dedal Hunter
height: 14 mm
Type number: 50-DH-14-00-400
Innomount quick detachable scope mount for Tikka T3 - Picatinny
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mount has an integrated Pictianny rail on the top and is therefore ideally suited to accept driven hunt sights, red dot sights or other accessories using the Weaver or Pictinny mount
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
offers a Picatinny Rail on top
height: 20 mm
Type number: 50-PT-20-00-400
Innomount quick detachable scope mount for Tikka T3 - Picatinny Long
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mount has an integrated extra long Pictianny rail on the top and is therefore ideally suited to accept driven hunt sights, red dot sights or other accessories using the Weaver or Pictinny mount
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
offers a Picatinny Rail on top
total length: 200 mm
height: 20 mm
Type number: 50-PT-20-100-400
Innomount quick detachable scope mount for Tikka T3 - Pulsar Trail 2 / Digisight Ultra N450 & N455
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mounting is suitable for the Pulsar Trail 2 / Digisight Ultra N450 & N455.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for Pulsar Trail 2 / Digisight Ultra N450 & N455
height: 10 mm
Type number: 50-PA2-10-00-400
Innomount quick detachable scope mount for Tikka T3 - Pulsar Thermion
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mounting is suitable for the Pulsar Thermion.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for Pulsar Thermion
height: 24 mm
Type number: 50-TH-24-00-400
Innomount quick detachable scope mount for Tikka T3 - Pulsar Digex
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mounting is suitable for the Pulsar Digex.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for Pulsar Digex
height: 27 mm
Type number: 50-DE-27-00-400
Innomount quick detachable scope mount for Tikka T3 - ATN4
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mounting is suitable for the Pulsar ATN4 or X-Sight 4K PRO / X-Sight 4K Buckhunter / Thor 4.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for ATN4 and X-Sight 4K PRO / X-Sight 4K Buckhunter / Thor 4
height: 24 mm
Type number: 50-ATN4-24-00-400
Innomount quick detachable scope mount for Tikka T3 - ATN
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mounting is suitable for the Pulsar ATN or X-Sight I+II / Thor / Mars.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for ATN and X-Sight I+II / Thor / Mars
height: 12 mm
Type number: 50-ATN-12-00-400
Innomount quick detachable scope mount for Tikka T3 - TVT Archer
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mounting is suitable for the TVT Archer.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for TVT Archer
height: 13 mm
Type number: 50-AR-13-00-400
Innomount quick detachable scope mount for Tikka T3 - I Ray X-Sight
Innogun's quick-detachable scope mount is pushed onto the prisms on the rail of the Tikka T3 and fastened reliably and with high accuracy using the quick-clamping fasteners.
The mounting is suitable for the I Ray X-Sight, or Liemke Sperber 50 & 64 / Lahoux Scope.
Details:
Clamping lever with safety device against unintentional opening
high accuracy
made of steel
suitable for Tikka T3
suitable for I Ray X-Sight, or Liemke Sperber 50 & 64 / Lahoux Scope
height: 16 mm
Type number: 50-IRX-16-00-400
Innomount fixed scope mount for Tikka T3 - Swarovski SR rail
The fixed scope mount of Innogun is pushed onto the prisms on the running rail of the Tikka T3 and fixed with the Torx screws.
The serration on the upper side of the scope mount is milled from the solid, which guarantees a reliable transmission of the recoil forces of your weapon to the Swarovski scope via the SR rail. Thus nothing can slip.
details:
Fixed mount
made of steel
suitable for Tikka T3
suitable for Swarovski riflescope with SR rail
construction height: 10 mm
Type number: 53-SR-10-00-400
Innomount fixed scope mount for Tikka T3 - Zeiss rail
The fixed scope mount of Innogun is pushed onto the prisms on the running rail of the Tikka T3 and fixed with the Torx screws.
The Zeiss inner rail is currently used by several manufacturers, as their patent has expired. Therefore you can mount riflescopes of the brands Zeiss, Leica, Meopta, etc. easily and reliably on this mount.
The Innomount mount is a first-class mounting for your Tikka T3 rifle. Due to a variety of different designs, you have almost every possible combination of your weapon & a desired target optic at your disposal.
details:
Fixed mount
made of steel
suitable for Tikka T3
suitable for a riflescope with Zeiss rail (Zeiss, Leica, Meopta,...)
construction height: 9 mm
Type number: 53-VM-09-00-400
Innomount quick detachable scope mount for Tikka T3 (slight) - Aimpoint Micro / Holosun
Minimalistically small is this scope mount - just like the red dot itself. The quick release mount fits the Aimpoint Micro as well as the Holosun for mounting on a Tikka T3 rifle.
Due to the innovative quick release lever, this mount fits exactly and reliably in seconds on the weapon and can be removed just as quickly.
Details:
Clamping lever with safety device against unintentional opening
repeatable
extra flat (slight)
made of steel
suitable for Tikka T3
suitable for Aimpoint Micro or Holosun reflex sights
height: 5 mm
Type number: 52-AM-05-00-400
Innomount quick detachable scope mount for Tikka T3 (slight) - Docter Sight
Minimalistically small is this scope mount - just like the red dot itself. The quick release mount fits the Docter Sight or Leica Tempus or Kahles Helia RD for mounting on a Tikka T3 rifle.
Due to the innovative quick release lever, this mount fits exactly and reliably in seconds on the weapon and can be removed just as quickly.
Details:
Clamping lever with safety device against unintentional opening
repeatable
extra flat (slight)
made of steel
suitable for Tikka T3
suitable for Docter Sight, Leica Tempus, Kahles Helia RD, Meopta Meosight,...
height: 5 mm
Type number: 52-DS-05-00-400
€195.00*
This website uses cookies to ensure the best experience possible. More information...
