Innomount mounts for Weaver / Picatinny and rings

Innomount Zero - Weaver/Picatinny - Ringe

Innomount Zero - Weaver/Picatinny - Ring Mount

Innomount ZERO - quick detachable scope mount for Weaver/Picatiny - Ring Mount With the new Zero breech system, you screw the mount onto the gun and then press the lever to the mount - this uncouples it and it can no longer operate the breech mechanism. To release the mount again, pull the lever towards you, this couples it in the breech mechanism and now the breech can be released again. A very reliable and safe method. The Innomount quick detachable scope mount offers a classic rifle scope assembly using rings. Rings of 26, 30, 34, 35, 36 or 40mm diameter are available. In addition, there are 3 different heights for each diameter. The "base" remains the same, the rings are offered in different heights and are securely bolted to the base using a pivot pin. Fits on a Weaver/Picatinny rail. Height: Rings (standard) in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 14 mm Rings BH+3 in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 17 mm Rings BH+6 in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 20 mm Details: Zero locking mechanism repeatable suitable for Weaver/Picatinny suitable for mounting with rings of different diameters Overall height: 14 / 17 or 20 mm

From €359.00*

Innomount SSM - Weaver/Picatinny - Ringe

Innogun Quick Release Mount for Weaver/Picatinny - Ring Mount

Innomount quick detachable scope mount for Weaver/Picatiny - Ring Mount The Innomount quick detachable scope mount offers a classic rifle scope assembly using rings. Rings of 26, 30, 34, 35, 36 or 40mm diameter are available. In addition, there are 3 different heights for each diameter. The "base" remains the same, the rings are offered in different heights and are securely bolted to the base using a pivot pin. The scope mount has quick-release fasteners which are secured against unintentional opening. Fits on a Weaver/Picatinny rail. Height: Rings (standard) in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 14 mm Rings BH+3 in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 17 mm Rings BH+6 in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 20 mm Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver/Picatinny suitable for mounting with rings of different diameters 20 MOA edition available for long range shooters Overall height: 14 / 17 or 20 mm

From €329.00*

Innomount SSM - Weaver/Picatinny - Ringe - zweiteilig variabel

Innogun Quick Release Mount for Weaver/Picatinny - Ring Mount - 2-piece variable

Innomount quick detachable scope mount for Weaver/Picatiny - Ring Mount - 2-piece variable The Innomount quick detachable scope mount offers a classic rifle scope assembly using rings. Rings of 26, 30, 34, 35, 36 or 40mm diameter are available. In addition, there are 3 different heights for each diameter. The "base" remains the same, the rings are offered in different heights and are securely bolted to the base using a pivot pin. The scope mount has quick-release fasteners which are secured against unintentional opening. Fits on a Weaver/Picatinny rail, 2-piece variable. Height: Rings (standard) in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 20 mm Rings BH+3 in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 23 mm Rings BH+6 in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 26 mm Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver/Picatinny suitable for mounting with rings of different diameters 2-piece variable 20 MOA edition available for long range shooters

From €329.00*

Innomount Multirail Picatinny-Blaser

Innomount Multirail Picatinny Blaser This versatile mounting rail allows the use of Weaver/Picatinny mounts on the weapon as well as the use of a Blaser saddle mount on a Sauer, Remington, Browning BAR, Benelli or Tikka weapon. Since the Blaser saddle mount is extremely reliable, easy to mount and handle and very repeatable, it is now possible to use this first-class mount for a large number of rifles and at the same time, for example, use a red dot by means of Weaver mounting on the same weapon-side mounting base. Details: hardened steel repeatable very versatile Weaver / Picatinny rail Mounts for Blaser saddle mounting

From €169.00*

%

Aufkippmontage für Weaver-Profil / Ringe

Recknagel Scope Mount for Weaver / rings

Scope Mount for Weaver (Picatinny) and rings in different sizes With this high-quality assembly of Recknagel you can mount aiming optics on a Weaver or Picatinny rail without rail. The 3-sided nut allows a reliable clamping by means of a special wrench (supplied), while the variant with polyform lever can be removed or mounted without additional tools. Details: Height: different Alumnium black anodized

€129.90* €259.00* (49.85% saved)

Innomount BG-1/4 Zoll Drehmoment - Schraubendreher

Innomount BG-1/4 inch torque screwdriver 0.8 - 6 Nm

Innomount BG-1/4 inch torque - screwdriver for mounting riflescopes "Hand-tight" is not enough for us. If you want to mount a riflescope properly and reliably, you should do so with the right torque. With its adjustable torque of 0.8 to 6 Nm, this torque screwdriver covers almost all mounting work on riflescope mounts. The scope of delivery includes 5 bits (Torx & hexagon socket) for the most common Innomount screws. However, any 1/4 inch bit will fit into the holder. Note: For permanent fastening of screws on ZFR mounts, we recommend the additional use of screw locking varnish to prevent screws from loosening unintentionally. We have had good experiences with "Loctite 243" (no guarantee).

€59.00*

Your riflescope is mounted with rings? And now you are missing the matching connection to the Weaver or Picatinny rail, which you have mounted or want to mount on the weapon side? The high-quality Innomount mounts are exactly the right interface between hunting rifle and rifle scope with ring mounting.

High flexibility with Innomount mounts with rings

Mounting the rifle scope using rings has its advantages. With the right mounting base, e.g. with forward tilt, the point of impact for benchrest shooting at long distances can be adjusted. At the same time the rings are much more universal than most rails and are not manufacturer-specific. With Innomount mounting, you do not have to do without the advantages of the rings if you have mounted or want to mount a Weaver or Picatinny rail on the weapon side.

Rings with different diameters and heights offer you all possibilities when mounting the target optics on the Weaver or Picatinny rail. Quick-release fasteners ensure easy handling without the possibility of unintentional opening.

Questions about Innomount scope mounting with rings?

If you are looking for a suitable quick-release mount for Weaver and Picatinny, which you would like to use for distance shooting with your ring-screwed rifle scope, this is the best choice. We will be happy to answer your individual questions about our products and assist you in your selection - by telephone on 06071-922765 and also by e-mail.