Scope Mounts for Weaver / Picatinny and Swarovski SR-Rail

Innomount Zero - Weaver/Picatinny - Swarovski BH 20

Innomount ZERO for Weaver / Picatinny - Swarovski SR-Rail, height 20 mm With the Zero quick-release fastener and an overall height of 20 mm, you can mount the scope particularly high with this Innoumount quick-release mount - suitable for night vision and thermal imaging attachments. Details: Zero Fast Detachable Locking Mechanism repeatable suitable for Weaver / Picatinny rail suitable for Swarovski rifle scope with SR Rail Overall height: 20 mm Type number: 40-SR-20-00-200

From €359.00*

Innomount SSM: Weaver/Picatinny - Swarovski

Innogun Quick Release Mount for Weaver/Picatinny - Swarovski

Innomount Quick Detachable Scope Mount for Weaver / Picatinny - Swarovski SR-Rail The flexibility and reliability of a Weaver or Picatinny rail as a rifle scope mount has not only convinced the military worldwide, but this assembly also finds more and more supporters among hunters and sport shooters. And rightly so. Innogun's quick-release mount offers a precise and repeatable accuracy rifle scope mount, suitable for both Weaver and Picatinny rails on the weapon and a Swarovski rifle scope with SR rail on the other side. The advantages of the high-quality rifle optics of the Swarovski Z6i and Z8i series with the SR rail and the Weaver mounting are therefore open to the hunter in particular. The quick-release mounting has reliable locks, similar to those on a bicycle hub. These are additionally countersunk in the housing to prevent unintentional opening or getting stuck. To release, a button must be pressed on the opposite side, whereby the quick-release fastener becomes again seizable. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver / Picatinny rail suitable for Swarovski rifle scope with SR Rail Overall height: 8 mm Type number: 50-SR-08-00-200

From €329.00*

Innomount SSM - Weaver/Picatinny - Swarovski - Kröpfung

Innogun Quick Release Mount for Weaver/Picatinny - Swarovski - Cranking

Innomount Quick Detachable Scope Mount for Weaver / Picatinny - Swarovski SR-Rail - Cranking The Innomount quick detachable scope mount is characterized by its reliability and solid workmanship. The quick-release clamps are recessed in the housing when closed to prevent unintentional opening. To release, a button on the opposite side must be pressed. The cranked version for the Swarovski SR-Rail offers the possibility to position the rifle scope a little further back, so that the eye distance fits to the shooter. The offset is 25mm. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver / Picatinny rail suitable for Swarovski rifle scope with SR Rail Overall height: 8 mm cranking: 25 mm Type number: 50-SR-08-25-200

From €329.00*

Innomount SSM - Weaver/Picatinny - Swarovski - zweiteilig variabel

Innogun Quick Release Mount for Weaver/Picatinny - Swarovski - two-piece, variable

Innomount quick detachable scope mount for Weaver / Picatinny - Swarovski SR Rail, two-piece, variable The flexibility and reliability of a Weaver or Picatinny rail as a rifle scope mount has not only convinced the military worldwide, but this assembly also finds more and more supporters among hunters and sport shooters. And rightly so. Innogun's quick-release mount offers a precise and repeatable rifle scope mount, suitable for both Weaver and Picatinny rails on the weapon and a Swarovski rifle scope with SR rail on the other side. The two-piece model offers the stability of a one-piece mount because the rear foot is firmly bolted to the actual mount, but also offers a high degree of flexibility when it comes to adapting the rifle scope mount to the rifle. Especially when it comes to non-standard mounting bases, this model is very advantageous. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver / Picatinny rail suitable for Swarovski riflescope with SR rail Overall height: 15 mm Type number: 54-SR-15-00-200

From €329.00*

Innomount SSM - Weaver/Picatinny - Swarovski BH 20

Innogun Quick Release Mount for Weaver/Picatinny - Swarovski BH 20

Innomount Quick Detachable Scope Mount for Weaver / Picatinny - Swarovski SR-Rail, height 20 mm With this special version of the Innoumount quick clamp mount you can mount the riflescope particularly high. Otherwise, this rifle scope mount offers you the advantages of all Innoumount mounts. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver / Picatinny rail suitable for Swarovski rifle scope with SR Rail Overall height: 20 mm Type number: 50-SR-20-00-200

From €329.00*

Innomount SSM - Weaver/Picatinny - Swarovski - zweiteilig

Innogun Quick Release Mount for Weaver/Picatinny - Swarovski - two-piece

Innomount Quick Detachable Scope Mount for Weaver / Picatinny - Swarovski SR-Rail - two-piece The Innomount quick detachable scope mount is characterized by its reliability and solid workmanship. The quick-release clamps are recessed in the housing when closed to prevent unintentional opening. To release, a button on the opposite side must be pressed. The two-piece version offers maximum flexibility in positioning the optics on the weapon. Only for extremely recoil-strong calibers the one-piece assembly should be chosen. Details: Clamping lever with protection against unintentional opening repeatable accuracy two-piece design made of steel suitable for Weaver / Picatinny rail suitable for Swarovski rifle scope with SR Rail Overall height: 8 mm Type number: 51-SR-08-00-200

From €329.00*

Innomount SSM - Weaver/Picatinny - Swarovski - zweiteilig gekröpft

Innogun Quick Release Mount for Weaver/Picatinny - Swarovski - two-piece cranked

Innomount Quick Detachable Scope Mount for Weaver / Picatinny - Swarovski SR-Rail - two-piece cranked The Innomount quick detachable scope mount is characterized by its reliability and solid workmanship. The quick-release clamps are recessed in the housing when closed to prevent unintentional opening. To release, a button on the opposite side must be pressed. The two-piece version offers maximum flexibility in positioning the optics on the weapon. Only for extremely recoil-strong calibers the one-piece assembly should be chosen. In addition, this version is cranked with 25 mm offset. Details: Clamping lever with protection against unintentional opening repeatable accuracy two-piece design made of steel suitable for Weaver / Picatinny rail suitable for Swarovski rifle scope with SR Rail Cranked Edition: 25 mm offset Overall height: 8 mm Type number: 51-SR-08-25-200

From €329.00*

Innomount Festmontage - Weaver/Picatinny - Swarovski

Innogun Fixed Mount for Weaver/Picatinny - Swarovski

Innomount Fixed Mount for Weaver / Picatinny - Swarovski SR Rail This Innomount mount can be used for all Swarovski rifle scopes with the SR rail as a mounting option and offers an extremely reliable and economical mounting option for rifles with Weaver or Picatinny base rails. This scpe mount is intentionally fixed and can only be mounted or dismounted using a Torx key. Details: Fixed mounting, detachable with Torx key made of steel suitable for Weaver / Picatinny rail suitable for Swarovski riflescopes with SR Rail Overall height: 8 mm Type number: 53-SR-08-00-200

From €259.00*

Innomount Festmontage - Weaver/Picatinny - Swarovski BH 20

Innomount Fixed Mount - Weaver/Picatinny - Swarovski BH 20

Innomount Fixed Mount for Weaver / Picatinny - Swarovski SR-Rail, height 20 mm With the fixed scope mount and an overall height of 20 mm, you can mount the scope particularly high with this Innoumount quick-release mount - suitable for night vision and thermal imaging attachments. Details: Fixed Mount repeatable suitable for Weaver / Picatinny rail suitable for Swarovski rifle scope with SR Rail Overall height: 20 mm Type number: 53-SR-20-00-200

€259.00*

Tip

Recknagel Aufkippmontage für Weaver-Profil / Swarovski SR-Schiene

Recknagel Scope Mount for Weaver / Swarovski SR-Rail

Recknagel Scope Mount for Weaver / Swarovski SR-Rail This high-quality Recknagel mount allows you to mount aiming optics with Swarovski SR splint on a Weaver or Picatinny splint. The 3-sided nut allows a reliable clamping by means of a special key (supplied), while the variant with polyform lever can be removed or mounted without additional tools. Details: Overall height: 7.5mm Aluminium black anodized

From €249.00*

Innomount BG-1/4 Zoll Drehmoment - Schraubendreher

Innomount BG-1/4 inch torque screwdriver 0.8 - 6 Nm

Innomount BG-1/4 inch torque - screwdriver for mounting riflescopes "Hand-tight" is not enough for us. If you want to mount a riflescope properly and reliably, you should do so with the right torque. With its adjustable torque of 0.8 to 6 Nm, this torque screwdriver covers almost all mounting work on riflescope mounts. The scope of delivery includes 5 bits (Torx & hexagon socket) for the most common Innomount screws. However, any 1/4 inch bit will fit into the holder. Note: For permanent fastening of screws on ZFR mounts, we recommend the additional use of screw locking varnish to prevent screws from loosening unintentionally. We have had good experiences with "Loctite 243" (no guarantee).

€59.00*

On the weapon side you have mounted a Weaver / Picatinny rail and are now looking for a suitable mount for the Swarovski rifle scope? Our shop offers you Innomount rifle scope mounts for the Swarovski SR rail, which attaches your rifle scope repeatable and reliable.

High-quality Weaver & Picatinny mounts for rifle scopes with Swarovski SR rail

For the Weaver and Picatinny, Innomount offers high-quality rifle scope mounts for Swarovski SR-Rail, which are characterized by a very high repeatability and inspire in hunting practice with their simple and reliable handling. The Swarovski rifle scope can be screwed to the Innomount mounting base via the inner rail without tension and without great knowledge and only with few tools. This allows you to benefit from the advantages of the high-quality Swarovski aiming optics with SR-Rail as well as from the practical Weaver / Picatinny quick-release mounting or fixed mounting.

In our shop you will find a suitable Innomount mounting base for all Swarovski aiming optics, suitable for Weaver and Picatinny rails. This applies, for example, to the Z6i and Z8i series rifle scopes. We also offer suitable mounts for high recoil calibers on which you would like to use your Swarovski target optics.

Innomount mounts for Weaver / Picatinny and Swarovski: Which is the right one?

Please feel free to contact us for a personal consultation if you need assistance in choosing the right scope mount for Swarovski rail or if you would like to learn more about the individual quick release and fixed mounts. You can reach us during opening hours at 06071-922765 or conveniently by e-mail.